• CategoryTinySA

tinySA Spectrum Analyzer

Documentation

The tinySA is a small spectrum analyzer, primarily intended for 0.1 MHz to 350 MHz input but it has some nice other capabilities:

• Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1 MHZ - 350 MHz, lesser quality UHF input for 240 MHz - 960 MHz.
• Switchable resolution bandpass filters for both ranges between 2.6 kHz and 640 kHz.
• Color display showing 290 scan points covering up to the full low or high frequency range.
• Input Step attenuator from 0 dB to 31 dB for the MF/HF/VHF input.
• When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1 MHz-350 MHz, UHF square wave output between 240 MHz-960 MHz.
• A built-in calibration signal generator that is used for automatic self test and low input calibration.
• Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.
• Rechargeable battery allowing a minimum of at least 2 hours portable use.
• Due to the low cost and very small form factor there are certain relevant limitations.

The following pages are a copy of tinySA PMwiki in order to do not loose all the informations, if those web pages are going offline.

So, start here with the tinySA Home Page.

List of pages in this category:

-- RudolfReuter 2020-10-15 03:37:22

Go back to CategoryRoot or FrontPage ; KontaktEmail (ContactEmail)