added hint to n12V fan
|Deletions are marked like this.||Additions are marked like this.|
|Line 27:||Line 27:|
Take care, they changed the '''fan'' from 230 VAC to 12 VDC with the new PSU, page 7-12 in the service manual:
* 1630A from 2715Axxxx
* 1630D from 2720Axxxx
* 1630G from 2602Axxxx
* 1631A from 2714Axxxx
* 1631D from 2713Axxxxx
HP1631D Logic Analyzer - Scope
I own a HP1631D Logic Analyzer (build 1984), with 40 channels State-, 16 channel Timing-Analysis and 2 analog channels (oscilloscope). The HP1630 is a pure Logic Analyzer, the HP1631 has in addition an oscilloscope plug in.
The oscilloscope has a bandwidth of 50 MHz and a sampling rate of 200 MHz.
As accessory I have a preprocessor for RS232, RS449 and GPIB bus and the suitable Inverse Assemblers.
The draw back is the wight (18 kg), power consumption (275-300 W) and the noise (63 dB(A)).
When you click on a picture, you will get in full size.
The following manuals can be downloaded from Agilent, search with google:
01630-90915 1630A-D-G Operating & Programming Oct85.pdf - 16.4 MB
HP1631D_SM_01630-90916.pdf - Operating & Programming (with oscilloscope), 27.9 MB
- 01630-90916_HP1630_Service.pdf - Service manual, 27.9 MB
- Bus_Preprocessor_10342B.pdf - for serial links and micro processor CPU, 3.6 MB
hp 1630d 9 al fin.pdf - HPIB & HP-IL programming, 2.5 MB
Take care, they changed the fan from 230 VAC to 12 VDC with the new PSU, page 7-12 in the service manual: It is possible to reduce the noise of the fan. To open the housing, you have to loosen (center one) or remove (feet) the screws, which are marked with an In order to reduce the noise of the equipment I first have to figure out, what fan is build in Fan, As As a result, the NMB fan is less noisy. Measuring the noise in 1 m distance gives: You can buy from HP a The most versatile plug in board is the You can get software from HP (Inverse Assembler) which shows the signals of the analyzed bus in clear text. Inverse Assemblers are available for example: For the As an example the For more details about the -- RudolfReuter 2014-02-14 08:14:37
Fan noise reduction
build in: Papst Typ 4658N, 230 V, 18 W, 50 / 60 Hz
1 State Listing____________________Data Acquired Apr 13 2007 09:58
2 REMOTE <|
3 Label> ADDR ATN Mnemonic HEX EOI SRQ REN IFC STAT
4 Base > [HEX] [ ASM ] [HEX
6 [Mark] X [ Instructions ] X$
8 -0003* 0 ATN TAG_00 40 REN DA
9 -0002* 0 ATN *UNL* 3F REN DA
10 -0001* 0 ATN LAG_04 24 REN DA
11 +0000 0 B 42 REN DB
12 +0001 0 P 50 REN DB
13 +0002 0 ; 3B REN DB
14 +0003 0 <LF > 0A EOI REN D9
15 +0004* 0 ATN TAG_00 40 REN DA
16 +0005* 0 ATN *UNL* 3F REN DA
17 +0006* 0 ATN LAG_04 24 REN DA
18 +0007* 0 ATN GTL 01 REN DA
List of pages in this category:
It is possible to reduce the noise of the fan. To open the housing, you have to loosen (center one) or remove (feet) the screws, which are marked with anred arrow in the pictures to the right.
In order to reduce the noise of the equipment I first have to figure out, what fan is build in
Aslower noise alternative:
As a result, the NMB fan is less noisy. Measuring the noise in 1 m distance gives:
You can buy from HP aGeneral Purpose Probe Interface HP10269B, which takes the Pods from the logic analyzer. Then you can plug in underneath specific interfaces, in my case a Bus Preprocessor, see picture on the right.
The most versatile plug in board is theBus Preprocessor HP10342B which can analyze HPIB, RS232 and RS449 bus signals. The bus will be connected via flat cable with a standard D-plug. An overlay foil for the preprocessor helps to match the right pods to the right place, suitable to the application.
You can get software from HP (Inverse Assembler) which shows the signals of the analyzed bus in clear text.
Inverse Assemblers are available for example:
For theBus Preprocessor the follwing files are available:
As an example theGPIB analyze text screen (command Beep) with Bus Preprocessor HP10342B and Inverse Assembler (IHPIBc & IHPIBi):
For more details about theInverse Assembler have a look at HP1652InverseAssembler.
-- RudolfReuter 2014-02-14 08:14:37