Contents |
NAS = Network Attached Storage
Für die PC Daten soll ein NAS mit RAID 1 (gespiegelt) angeschafft werden. Gewünschte Eigenschaften:
- AFP Protokoll mit Time Machine support (Lion kompatibel) (NSA325 Firmware 4.40 OK)
- evtl Media Server (Twonky 7)
- Gigabit Netzwerk
- USB 3.0 ?
Durchsatz Schreiben >= 50 MB/s (File 1 GB)
- Kandidat 1: Zyxel NSA325, USB 3.0, 140 EUR, RAM 512 MB, WOL
- Kandidat 2: Zyxel NSA320, 94 EUR, RAM 512 MB, WOL
- Kandidat 3: Silver Store, USB 3.0, HFS+ (125 EUR) (keine Comunity, nur halbe Leistung)
- Kandidat 4: Qnap TS-212, USB 2.0, HFS+ (153 EUR) (kein USB 3.0, RAM 256 MB, no WOL)
Auf Grund des guten Preis/Leistungs Verhältnisses wurde dann ein Zyxel NSA320 angeschafft.
QNAP TS-212
- Firmware update 3.6.1 von 2012-05-10
Zyxel NSA320
- Markteinführung 2010-12.
- Von firmware Update 4.40 (2012-03), keine Dropbox Unterstützung?
- Die USB 3.0 Eigenschaft wird nicht gebraucht, da Gigabit Netzwerk schnell genug ist.
- Der Standby Mehrverbrauch von 3 Watt zur NSA325 lässt sich minimieren durch WOL.
Forum und Test (XFS erlaubt Quota's)
Zyxel Experte 2012-01-10 Frisch installierter NSA ============================ 1. Standardeinstellungen. 2. Jumbo-Frames im NSA auf 9KB. 3. Mediaserver aktiv (einige MP3, Photos sowie Videos aufgespielt – jedoch nicht sehr viele Dateien). 4. Rechner WinXP 64bit mit Realtek PCIe GBE Family Controller auf 4KB gestellt. 5. NSA sowie Rechner sind über einen ES-3124 an dessen GBit Uplink Ports zueinander verbunden. — Reale Werte, keine Laborwerte — Test mit aktuellen Total-Commander Internal-HDD (XFS) <> PC: FTP–Read = 55 MegaByte/Sekunde. FTP–Write = 12 MegaByte/Sekunde. CIFS-Read = 32 MegaByte/Sekunde. CIFS-Write = 30 MegaByte/Sekunde. Test mit aktuellen Total-Commander External-HDD (NTFS) <> PC: FTP–Read = 28 MegaByte/Sekunde. FTP–Write = 12 MegaByte/Sekunde. CIFS-Read = 30 MegaByte/Sekunde. CIFS-Write = 17 MegaByte/Sekunde. Wichtig, die internen Raten basieren noch auf XFS, der NSA-320 hat seit F/W v4.23 das Linux System EXT4 und ist dadurch nochmal ca. 30% schneller im Durchsatz. z.B. XFS: CIFS-Write = 30 MegaByte/Sekunde EXT4: CIFS-Write = 45 MegaByte/Sekunde. In diesem Test waren 2 2 x 2TB Festplatten im Raid 1 Modus.
1695 KB |
31.01.12 |
12:11:00 |
|
294 KB |
31.01.12 |
12:11:00 |
|
2143 KB |
31.01.12 |
12:12:00 |
|
19995 KB |
31.01.12 |
12:19:00 |
|
240 KB |
31.01.12 |
12:12:00 |
|
23489 KB |
31.01.12 |
12:22:00 |
|
15448 KB |
31.01.12 |
12:18:00 |
|
284 KB |
31.01.12 |
12:14:00 |
|
40213 KB |
31.01.12 |
12:25:00 |
|
114 KB |
31.01.12 |
12:19:00 |
|
68 KB |
31.01.12 |
12:19:00 |
|
1 KB |
08.09.10 |
12:48:00 |
|
5445 KB |
31.01.12 |
12:20:00 |
|
13 KB |
13.02.12 |
07:54:00 |
Zyxel NAS Starter Utility Mac OS X
Leider war auf der mitgelieferten CD-ROM keine NAS Starter Utility für Mac OS X dabei. Zum Glück kann man aber über die Zyxel Niderlassung in der Schweiz eine Mac OS X passende Software herunterladen, siehe bei Links.
Archiv NSA_2_02_MAC-NSU-2_02_1025_MAC_ENG.zip, Version 2.02 2011-02-23, Größe 41,2 MB Installation NSU-2.02_1025_MAC_ENG.dmg, Größe 71,6 MB 2010-12-01 App NSU.app, Größe 61 MB, version 2.9 2010-12-01 NSA320 Initialization wizard: Default Configuration: A default system name: NSA320 Your computer timezone Your computer network configuration as network settings. HDD configuration: Raid1 Klick auf Next Change Admin Password: oz...
Jetzt kann man auf die Webmaske gehen und Einstellungen vornehmen.
/System Settings/Date-Time: Timezone: (GMT+01:00) Network TCP/IP: /IP-Address: dynamic 192.168.17.166 Note: NAS will use port 8082 for media streaming. Jumbo Frames: disabled Maintenance, Power: Power Management: Turn off hard disk(s) 15 -> 60 min Firmware 4.23
Zyxel NSA320 Firmware 4.40
TimeMachine Support (Wie gehts?)
FFP-USB-Stick, FW.4.40
Fonts Fun Plug ist eine Software auf einem USB Stick, die beim booten der NSA320 automatisch gestartet wird. Zuerst wird ein Telnet Server gestartet, dass man Shell Zugang zum NSA320 hat.
Damit kann man dann den SSH Daemon (Server) aktivieren, und dann aus Sicherheitsgründen den Telnet Daemon wieder deaktivieren. Das ist folgend als Kochrezept beschrieben.
Wichtig ist der Script File usb_key_func.sh zusammen mit dem File:
File: nsa310_check_file_C0 Inhalt: /mnt/parnerkey/usb_key_func.sh /mnt/parnerkey/salted_md5sum_3x0 File: salted_md5sum Inhalt: 883710617d838db6d3f51b04c1bcbe4d - ACHTUNG: Wenn man etwas am File "usb_key_func.sh" ändert, muss man den File "salted_md5sum" neu machen. Das ist im File "usb_key_func.sh" beschrieben.
Kopiere den Inhalt des Archivs FFPStick-2012-03-19.zip auf einen USB-Stick. Bei einem NSA320 mache folgende Änderung auf dem USB-Stick:
# lösche file nsa310_check_file_C0 # Rename nsa310_check_file_C0.libzy.so to nsa310_check_file_C0, replacing the original nsa310_check_file_C0.
- Werfe den FFP-USB-Stick aus
- Fahre den NSA320 herunter (shutdown)
- Stecke den FPP-USB-Stick auf einen hinteren USB 2.0 Steckplatz (Aussenseite = /dev/sdc)
- Starte den NSA320 mit der Einschalt Taste
- Warte einige Minuten
Wenn man auf dem vom NSA320 erkannten USB-Stick den file ffpboot.log (8 KB) sieht, dann war mit großer Wahrscheinlichkeit die Installation erfolgreich. Man sollte den File dann lokal sichern.
# Reboot NSA320 # Mit einem Terminal per Telnet einloggen $ telnet 192.168.17.166 Trying 192.168.17.166... Connected to nsa320.fritz.box. Escape character is '^]'. sh-4.1# # Erlaube SSH Daemon Start sh-4.1# chmod a+x /ffp/start/sshd.sh # Starte SSH Daemon sh-4.1# /ffp/start/sshd.sh start Generating public/private rsa1 key pair. Your identification has been saved in /ffp/etc/ssh/ssh_host_key. Your public key has been saved in /ffp/etc/ssh/ssh_host_key.pub. The key fingerprint is: b8:3c:b9:c0:e2:e8:1f:08:d9:01:3c:60:b8:81:2a:26 root@NSA320 The key's randomart image is: +--[RSA1 2048]----+ |B. | |=+ | |.oo | |E+ . . | |* . . S | |. .. . o | | ...o = | | o ... o | |o.o. . | +-----------------+ Generating public/private dsa key pair. Your identification has been saved in /ffp/etc/ssh/ssh_host_dsa_key. Your public key has been saved in /ffp/etc/ssh/ssh_host_dsa_key.pub. The key fingerprint is: ea:30:81:2a:47:1e:b7:c6:2d:86:e1:03:13:d7:fb:ef root@NSA320 The key's randomart image is: +--[ DSA 1024]----+ | | | . | |. . . | | o . . | |o = + S | | B * = . | |o * O + | |.. + = . | | ..E | +-----------------+ Generating public/private rsa key pair. Your identification has been saved in /ffp/etc/ssh/ssh_host_rsa_key. Your public key has been saved in /ffp/etc/ssh/ssh_host_rsa_key.pub. The key fingerprint is: 71:fa:25:91:aa:46:2f:5a:55:16:82:52:0c:0e:e2:39 root@NSA320 The key's randomart image is: +--[ RSA 2048]----+ |. . .+... . | |...o. o . o | | E .. . * | | . B . | | . S . . | | . + . o | | = . . | | + . | | . | +-----------------+ Generating public/private ecdsa key pair. Your identification has been saved in /ffp/etc/ssh/ssh_host_ecdsa_key. Your public key has been saved in /ffp/etc/ssh/ssh_host_ecdsa_key.pub. The key fingerprint is: 9f:c3:f8:4d:73:dd:7c:f3:90:d5:e9:8d:66:d9:b2:1d root@NSA320 The key's randomart image is: +--[ECDSA 256]---+ | | | | | | | o| | S .o| | + . .Oo| | . = o XEB| | . + = ==| | . . . o| +-----------------+ Starting /ffp/sbin/sshd # login als root (pw=root) $ ssh root@192.168.17.166 root@192.168.17.166's password: == Welcome at FFP version 0.7/arm, running on NSA320 NSA320, firmware V4.40(AFO.0) == root@NSA320:~# # Jetzt das "root" passwort ändern root@NSA320:/home# passwd root # 2x das neue Passwort eingeben # Test $ logout $ ssh root@192.168.17.166 # Wenn das OK ist, dann "Telnet" abschalten $ /ffp/start/telnetd.sh stop $ chmod a-x /ffp/start/telnetd.sh
Zyxel NSA320, SMART
Man kann das Paket SMART für Überwachung der Festplatten installieren.
- Vorteil ist, das für jede Festplatte die Temperatur einzeln angezeigt wird.
- Wenn man eine einzelene Festplatte anklickt, kann man eine kurze oder ausführliche Info abrufen.
FFP packages
Wenn FFP installiert ist, kann man noch vorkompilierte Pakete installieren, mit dem Paketmanager:
# macht einen Listen update und zeigt, was noch nicht installiert ist. # URL: ffp.inreto.de/ffp/0.7/arm/packages/0.7/arm/ $ slacker -Ui # Neu installiert: # avahi - service discovery on local networks # Avahi is a system which facilitates service discovery on a local network via # the mDNS/DNS-SD protocol suite. This enables you to plug your laptop or # computer into a network and instantly be able to view other people who you can # chat with, find printers to print to or find files being shared. Compatible # technology is found in Apple MacOS X (branded Bonjour and sometimes Zeroconf). # Homepage: http://avahi.org/ avahi-0.6.30-arm-1.txz # db5 - Berkeley Database 5.x # http://www.oracle.com/technetwork/database/berkeleydb/overview/index.html db5-5.2.36-arm-1.txz # graphic library glib2-2.30.2-arm-0.txz # htop is an interactive text-mode process viewer for Linux. htop-1.0-arm-0.txz # iftop does for network usage what top(1) does for CPU usage. iftop-1.0pre2-arm-0.txz # libdaemon - C library that eases the writing of UNIX daemons # Homepage: http://0pointer.de/lennart/projects/libdaemon/ # for avahi libdaemon-0.14-arm-1.txz # libgcrypt - general purpose cryptographic library based on the code from GnuPG libgcrypt-1.5.0-arm-1.txz # libgpg-error - helper library to provide a common set of error codes and descriptions # Homepage: http://www.gnupg.org/ libgpg-error-1.10-arm-1.txz # libpcap - Packet Capture library, for nmap # Homepage: http://www.tcpdump.org/ libpcap-1.1.1-arm-1.txz # Homepage: http://www.kernel.org/pub/linux/docs/man-pages/ man-pages-3.35-arm-1.txz # GNU Midnight Commander is a visual file manager mc-4.8.1-arm-0.txz # Homepage: http://netatalk.sourceforge.net/ netatalk-2.2.2-arm-1.txz # Nmap ("Network Mapper") is a free and open source (license) utility for network exploration nmap-5.51-arm-0.txz $ nmap localhost
Der Mitentwickler mijzelf ist im Forum zu treffen.
Das Problem mit einem start script ist, dass das enthaltene Kommando rc_run_command nicht zu finden ist. Seltsamerweise ist es aber auch Start Script sshd.sh zu finden, und das funktioniert beim booten.
Um an den root Ordner zu kommen braucht man einen Helfer Script:
# look for init.d root@NSA320:/ffp/start# execute_outside_chroot ls /etc/init.d apcupsd crond.sh cups httpd.sh rc.reboot rc.shutdown rcS samba.sh schedule_trigger.sh zypkg_controller.sh # look for root root@NSA320:/# execute_outside_chroot ls / bin dev e-data etc home i-data init lib linuxrc mnt proc ram_bin root sbin sys tmp usr var zyxel # apache2 restart root@NSA320:/# execute_outside_chroot /etc/init.d/httpd.sh restart
NSA320, netatalk 2.2.2 setup
Mit FFP kommt das Apple File Transfer Paket netatalk. Dazu gehören die Pakete:
- avahi-0.6.30-arm-1.txz
- db5-5.2.36-arm-1.txz
- libdaemon-0.14-arm-1.txz # für avahi
- libgcrypt-1.5.0-arm-1.txz
- libgpg-error-1.10-arm-1.txz
- netatalk-2.2.2-arm-1.txz
Die Festplatten sind erreichbar auf:
root@NSA320:~# ls /mnt/HD_a2 admin aquota.user lost+found music photo public video
Die Installation des AFP Protokolls ist sehr aufwendig und zur Zeit nicht notwendig. Deshalb wird vorest darauf verzichtet.
Setup Hilfe für Lion mit afp und Time Machine.
# Edit File: /ffp/etc/netatalk/AppleVolumes.default /mnt/HD_a2/share01 options:usedots,upriv,tm # Edit file: /ffp/etc/netatalk/afpd.conf - -tcp -noddp -uamlist uams_dhx2.so,uams_clrtxt.so -setuplog "default log_info /ffp/var/run/afpd.log" -cnidserver localhost # Create /ffp/start/cnid_metad.sh and chmod +x it: $ touch /ffp/start/cnid_metad.sh # Edit File #!/ffp/bin/sh # PROVIDE: cnid_metad # REQUIRE: LOGIN . /ffp/etc/ffp.subr name="cnid_metad" command="/ffp/sbin/$name" run_rc_command "$1" # Also in /ffp/start/afpd.conf change this line: # REQUIRE: LOGIN to # REQUIRE: cnid_metad # If you want avahi magic, so that your backup volume shows up in the Time Machine as if it were an Apple Time Capsule: # Install: $ slacker -Ui avahi-0.6.30-1.tgz $ slacker -i libdaemon-0.14-1.tgz # Edit: /ffp/etc/netatalk/AppleVolumes.default: # /mnt/HD_a2/yourBackupVolume options:usedots,upriv,tm /mnt/HD_a2/share01 options:usedots,upriv,tm # Create /ffp/start/avahi.sh and chmod +x it: $ touch /ffp/start/avahi.sh # Edit File: #!/ffp/bin/sh # PROVIDE: avahi # REQUIRE: SERVERS . /ffp/etc/ffp.subr name="avahi" command="/ffp/sbin/avahi-daemon" avahi_daemon_flags="-D -s" required_files="/ffp/etc/avahi/avahi-daemon.conf /ffp/etc/avahi/hosts" start_cmd="avahi_start" avahi_start() { # need avahi user and group for priviledge separation if ! grep '^avahi:' /etc/passwd >/dev/null; then echo 'avahi:x:50:50:Avahi Daemon:/no/where:/bin/false' >>/etc/passwd fi if ! grep '^avahi:' /etc/shadow >/dev/null; then echo 'avahi:*:14493:0:99999:7:::' >>/etc/shadow fi if ! grep '^avahi:' /etc/group >/dev/null; then echo 'avahi::50:avahi' >>/etc/group fi proc_start $command } run_rc_command "$1" # Create /ffp/etc/avahi/services/afpd.service: $ touch /ffp/etc/avahi/services/afpd.service # Edit File <?xml version="1.0" standalone="no"?><!--*-nxml-*--> <!DOCTYPE service-group SYSTEM "avahi-service.dtd"> <service-group> <name replace-wildcards="yes">%h</name> <service> <type>_afpovertcp._tcp</type> <port>548</port> </service> </service-group> # Create /ffp/etc/avahi/services/adisk.service: $ touch /ffp/etc/avahi/services/adisk.service # Edit file <?xml version="1.0" standalone="no"?><!--*-nxml-*--> <!DOCTYPE service-group SYSTEM "avahi-service.dtd"> <service-group> <name replace-wildcards="yes">%h</name> <service> <type>_adisk._tcp</type> <port>9</port> <txt-record>dk0=adVN=share01,adVF=0x81</txt-record> </service> </service-group> # chmod +x /ffp/start/afpd.sh # Reboot NSA320 Unfortunately the afp daemon is not seen in the process list. Tracing does not help: root@NSA320:~# sh -x /ffp/start/afpd.sh start # (restart|stop) Fix from Mijzelf: $ mkdir /var/lock # /var/locks does NOT work # Debug help: strace -o logfile afpd # Debug help: strace -o logfile avahi-daemon # Debug help: strace -o logfile cnid_metad # Versuch per Hand die Installation fertig zu stellen: $ echo 'avahi:x:50:50:Avahi Daemon:/no/where:/bin/false' >>/etc/passwd $ echo 'avahi:*:14493:0:99999:7:::' >>/etc/shadow $ echo 'avahi::50:avahi' >>/etc/group
Die Daemonen laufen jetzt alle, aber es kann keine Verbindung hergestellt werden. Also wird die Time Machine nicht laufen. Besser auf ein Zyxel firmware Update warten.
NSA320, Spotlight index
Es ist schwierig die Spotlight suche mit Index auf dem NAS zu realisieren. Siehe Spotlight NAS Index Problem
Eine bessere Diskussion gibt es hier
- Also muss ich diese Prozedur jedes Mal komplett über jedes File laufen lassen, oder geht´s auch inkrementell?
- Ohne direkte Unterstützung durch das OS (oder bei einer NAS durch die Firmware), Thema "fsevents", also das Verfolgen von Änderungen am Dateisystem, muß man das immer komplett neu laufen lassen.
- Und kann ich dieses Index-Paket auch auf andere Macs übertragen oder müsste ich das auf jedem Client machen?
Spotlight ist eine Funktion des Volume bzw. Servers, nicht des Clients. Der Index wird auf der obersten Ebene des Volumes erstellt, in einem Ordner namens .Spotlight-V100, und steht damit dann auch jedem angebundenen Client zur Verfügung.
I tried the following procedure in terminal on a share from server where the spotlight did not work: $ mdutil /Volumes/shareName -i on To turn the index on. Then I run: $ cd /Volumes $ mdimport -Vp ./shareName # Jetzt kann man im Finder nach den Files suchen
Eine Problemlösung mit Konsolen Eingriff
Hilfs-Tool Onyx 2.4.5
NSA320, Time Machine Lion
Die Einrichtung ist im Handbuch beschrieben (Firmware Version 4.21, Edition 2, 04/2012)
Time Machine für NAS Betrieb öffnen, im Terminal:
$ defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Daten vom Computer finden:
Name: "rudis Mac Pro" MAC : 1c:6f:65:44:d3:3d oder $ ifconfig en0 | grep ether | sed s/://g | sed s/ether// 1c6f6544d33d
Das Festplatten Dienstprogramm aufrufen:
Menü: Ablage/Neu/Leeres Image Sichern unter: rudis-Mac-Pro_1c6f6544d33d Ort: Dokumente Größe: 330 GB Format: Mac OS Extended (Journaled) Verschlüsselung: Ohne Partition: Keine Partitionstabelle Image-Format: Mitwachsendes Bundle-Image
Leider gibt es ein Problem beim starten:
TimeMachine Verfügbar 855,01 von 983,99 GB Fehler: Time Machine konnte das Backup nicht erstellen. Das Backup-Volume im Netzwerk unterstützt die notwendigen AFP-Funktionen nicht. Der Vorgang kann nicht abgeschlossen werden. Es ist ein unbekannter Fehler aufgetreten (Fehler -6584). # Konsole 23.05.12 06:28:24,077 com.apple.backupd: afpfs fsctl failed to read settings: 45 Operation not supported 23.05.12 10:09:58,590 System Preferences: /Volumes/share01 is not supported as a Time Machine destination because fcntl(fd, F_FULLFSYNC, 1) failed with errno 45 (Operation not supported) 23.05.12 10:09:58,590 System Preferences: /Volumes/share01 is not supported as a Time Machine destination because kTMLockStealingSupported fsctl not implemented. 23.05.12 10:09:58,590 System Preferences: /Volumes/share01 is not supported as a Time Machine destination because kServerReplyCacheSupported fsctl not implemented
Hilfe dazu os-x-lion-afp-nas-connection-error-fix und http://forum.nas-portal.org/showthread.php?15351-afpd-Package-unter-OSX-Lion-10-7
Zu "45 Operation not supported" time-machine-on-lion-with-dns-320
Fehler Erklärung time-machine-backup, NAS
Carbon Copy Cloner mit net share usage-scenarios/backing-up-tofrom-network-volumes-and-other-non-hfs-volumes
Shell files Time Machine And OS X Lion Error
Time Machine, System Wiederherstellung Hilfe
Ubuntu 10.04 Lucid AFP 2.2 update - Ubuntu 10.04 has in the repository AFP version 2.05 only, while Lion needs version 2.2. An update procedure is described here.
# Get the actual archive $ wget https://launchpad.net/~stefanor/+archive/ppa/+files/netatalk_2.2.0-0ppa2%7Elucid1_i386.deb # Install package $ sudo dpkg -i netatalk_2.2.0-0ppa2~lucid1_i386.deb (Lese Datenbank ... 281187 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereiten zum Ersetzen von netatalk 2.0.5-3 (durch netatalk_2.2.0-0ppa2~lucid1_i386.deb) ... Stopping Netatalk Daemons: afpd cnid_metad papd timelord atalkd. Entpacke Ersatz für netatalk ... Richte netatalk ein (2.2.0-0ppa2~lucid1) ... Installiere neue Version der Konfigurationsdatei /etc/netatalk/afpd.conf ... Konfigurationsdatei »/etc/netatalk/AppleVolumes.default« ==> Modifiziert (von Ihnen oder einem Skript) seit der Installation. ==> Paketverteiler hat eine aktualisierte Version herausgegeben. Was möchten Sie damit machen? Ihre Wahlmöglichkeiten sind: Y oder I : Die Version des Paket-Betreuers installieren N oder O : Die momentan installierte Version beibehalten D : Die Unterschiede zwischen den Versionen anzeigen Z : Prozess in den Hintergrund, um die Situation zu begutachten Der Standardweg ist das Beibehalten der momentanen Version. *** AppleVolumes.default (Y/I/N/O/D/Z) [Vorgabe=N] ? n Installiere neue Version der Konfigurationsdatei /etc/netatalk/AppleVolumes.system ... Installiere neue Version der Konfigurationsdatei /etc/default/netatalk ... Installiere neue Version der Konfigurationsdatei /etc/init.d/netatalk ... Starting Netatalk services (this will take a while): cnid_metad afpd. Verarbeite Trigger für man-db ... Verarbeite Trigger für ureadahead ... ureadahead will be reprofiled on next reboot # Reboot # check version $ afpd -V afpd 2.2.0 - Apple Filing Protocol (AFP) daemon of Netatalk # Konsole 23.05.12 06:17:33,708 com.apple.backupd: Destination /Volumes/home_dir-1 does not support TM Lock Stealing
Laut c't funktioniert es nur mit manchen Herstellern.
NSA320, Prozessliste mit FFP
# ps -A PID TTY TIME CMD 1 ? 00:00:21 init 2 ? 00:00:00 kthreadd 3 ? 00:00:00 ksoftirqd/0 4 ? 00:00:00 events/0 5 ? 00:00:00 khelper 8 ? 00:00:00 async/mgr 116 ? 00:00:00 kblockd/0 121 ? 00:00:00 scsi_zyxeljob_w 126 ? 00:00:00 khubd 131 ? 00:00:02 kmmcd 154 ? 00:00:00 crypto 155 ? 00:00:00 crypto_ret 158 ? 00:00:00 button controll 166 ? 00:00:00 pdflush 167 ? 00:00:00 pdflush 168 ? 00:00:00 kswapd0 169 ? 00:00:00 aio/0 170 ? 00:00:00 nfsiod 171 ? 00:00:00 cifsoplockd 173 ? 00:00:00 xfs_mru_cache 174 ? 00:00:00 xfslogd/0 175 ? 00:00:00 xfsdatad/0 176 ? 00:00:00 xfsconvertd/0 177 ? 00:00:00 crypto/0 847 ? 00:00:00 scsi_eh_0 848 ? 00:00:00 scsi_eh_1 862 ? 00:00:00 sata2rbm/0 876 ? 00:00:00 mtdblockd 877 ? 00:00:00 nftld 970 ? 00:00:00 usbhid_resumer 974 ? 00:00:00 rpciod/0 1036 ? 00:00:00 linuxrc 1106 ? 00:00:00 scsi_eh_2 1107 ? 00:00:00 usb-storage 1288 ? 00:00:00 loop0 1304 ? 00:00:00 yaffs-bg-1 1469 ? 00:00:00 zylogd 1479 ? 00:00:00 uamd 1488 ? 00:00:00 cupsd 1513 ? 00:00:00 zyshd 1521 ? 00:00:00 sh 1522 ? 00:00:00 syslog-ng 1523 ? 00:00:00 zylogger 1685 ? 00:00:00 md0_raid1 1698 ? 00:00:00 kjournald2 1699 ? 00:00:00 ext4-dio-unwrit 1763 ? 00:00:02 dhcpcd_request 1780 ? 00:00:00 dhcpcd 1870 ? 00:00:00 pure-ftpd 1938 ? 00:00:01 mediaserver 2243 ? 00:00:00 nsuagent 3001 ? 00:00:00 myhotplug 3013 ? 00:00:00 do_btncpy 3143 ? 00:00:00 dservice 3194 ? 00:00:00 fadd 3212 ? 00:00:01 python # ver. 2.6.2 3715 ? 00:00:01 httpd 3721 ? 00:00:01 app_wd 3746 ? 00:00:00 linuxrc 3747 ? 00:00:01 httpd 3748 ? 00:00:00 httpd 3749 ? 00:00:00 httpd 5754 ? 00:00:00 crond 5795 ? 00:00:00 schedule_contro 5798 ? 00:00:00 timer_source 6263 ? 00:00:00 nmbd 6266 ? 00:00:00 smbd 6282 ? 00:00:00 after_booting.s 6300 ? 00:00:00 smbd 6549 ? 00:00:00 sshd 17911 ? 00:00:00 sshd 17915 pts/0 00:00:00 sh 22499 pts/0 00:00:00 ps 30179 ? 00:00:00 httpd 30453 ? 00:00:00 httpd 30863 ? 00:00:00 smartd 31257 ? 00:00:00 httpd
Zyxel NSA325
Auf die Firmware Version 4.50 (2012-07) warten.
Links
List of pages in this category:
-- RudolfReuter 2012-05-15 04:56:13
Go back to CategoryHowTo oder StartSeite ; KontaktEmail (ContactEmail)