Videos

All tinySA videos can be found on YouTube List

01 General introduction video
16 Basic introduction
02 First Use
17 Touch Calibration
03 Calibrating the HIGH input
27 Calibrating the Frequency
Menu Videos
- 04 Exploring the Display Menu
- 11 Preset Menu
- 07 Frequency Menu
- 08 Level Menu
- 09 Marker Menu and Marker positioning
- 10 Measure Menu
- 11 Config and Expert Config Menu
- 24 Quick menu's since firmware v1.1-52
- 26 Frequency slider demo since firmware v1.1-65
Applications
- 05 Signal Identification
- 06 Observing modulation
- 13 tinySA and NanoVNA measuring each other
- 18 Strong Signal Test
- 14 Testing a Transceiver
- 15 doing AM and FM generation and analysis
- 19 measuring an amplifier
- 20 Observing cable signals
- 21 Observing H and E fields
- 22 Settings impacting Scanning Speed
- 25 Trigger features
- 28 Testing a vacuum tube receiver
- 29 Sweeping a tunable filter using a scope in X-Y mode and the sweep voltage output of the tinySA
- 30 Remote Desktop
- 31 tinySA used to assess a Broadband Magnetic Loop Amplifier
- 32 tinySA Listening to the signal modulation
- 33 tinySA observing WiFi and DECT
- 34 High impedance input probe
- 35 Checking tinySA input and output levels
- 36 tinySA using NEO-7M output for frequency correction
  - 10 MHz * target_freq / measured_freq, example: 10 MHz * 500 MHz / 500.001 MHz = 9999980 Hz
  - Menu->CONFIG->EXPERT CONFIG->MORE->MORE->CORRECT FREQUENCY
- 37 tinySA May 2021 feature update
- 38 tinySA quick comparison of clone vs genuine
Internals
- 23 Internals: AGC and LNA

CategoryTinySA

Go back to TinySA-HomePage or FrontPage

TinySA-Videos (last edited 2021-05-25 09:00:42 by RudolfReuter)

Page.execute = 0.002s
getACL = 0.000s
init = 0.001s
load_multi_cfg = 0.000s
run = 0.018s
send_page = 0.018s
send_page_content = 0.003s
total = 0.020s